FE MONITOUCH V8 SERIES Reference: Additional Functions page 180

Step 7 When completing the setting, click [OK].
The files shown are saved in the "SCRN" folder under the access folder on the CF card.
CF card
DAT0000
3. Operations on MONITOUCH
Insert the CF card with 3D parts that are saved as described above into the MONITOUCH. When
opening a screen on the MONITOUCH, the CF card is automatically referenced for showing the 3D
parts on the MONITOUCH.
* If 3D parts are not stored correctly on the CF card or if the CF card is not inserted into the
MONITOUCH, the 3D parts will not be displayed on the MONITOUCH.
"SCRN" Folder
The "SCRN" folder contains the following files:
SCHEADER.BIN Header file
3Dxxxx.BIN Bitmap file for 3D part
Notes
• The 3D parts stored on a CF card may take longer before the 3D parts appear on the
MONITOUCH than those stored in the MONITOUCH memory.
Please keep such a time lag in mind.
(Access folder)
BITMAP
CARD
DSP
FONT
HDCOPY
JPEG
MEMO
MSG
RECIPE
SAMPLE
SCRN
SCHEADER.BIN
3D0001.BIN
3Dxxxx.BIN: 3D part data
3D0002.BIN
3D0003.BIN
3D0004.BIN
SCHEADER.BIN: Header file
3D0005.BIN
SNAP
SRAM
WAV
WEBSERV
14.1 Screen Data File Capacity Increased
xxxx = Bitmap No.: 1 to 1023
xxxx = Bitmap No.: 1 to 1023
14
14-13