FE MONITOUCH V8 SERIES Reference: Additional Functions page 120

Acknowledge Switch
1. Follow the steps below to place an acknowledge switch.
2. Open the [Main] tab window in the [Switch] dialog.
Function
Acknowledge
3. Select [Acknowledge] under [Function].
4. In the [Switch] dialog, open the [Detail] tab window.
ID
(0 to 255)
Alarm acknowledged times can be displayed in the alarm tracking area.
Selective Acknowledge:
For a selected alarm message, this switch is used to acknowledge the
message and to show the acknowledged time.
Acknowledge All:
For all the displayed alarm messages, this switch is used to
acknowledge the messages and to show the acknowledged time.
Set the same number as the ID number of the alarm tracking item.
9.2 Acknowledge Function
Description
9
9-15