Table of Contents
Advertisement
19.8 Limitations
License Limitations
• One license is granted to one V8 unit.
• Reissuing a license key code is not allowed. Please take care in managing the key code.
Display Limitations
• Remote desktop window display is enabled on the screen (in the screen library) only. Display in
the overlap library is disabled.
• Multiple remote desktop windows cannot be displayed at the same time. If display areas are
concurrently placed for multiple remote desktops and the box for [
checked, the display area placed first takes effect.
• While a remote desktop window is displayed, an attempt to bring up another on the same screen
will turn off the initial window and switches to the next window.
• While a remote desktop window is displayed, a change to the server (computer) resolution will
forcibly turn off the window.
• While a remote desktop window is displayed, you can turn it off via a method that is different from
the method used to display the window, provided that the same remote desktop table number is
specified. However, the [disconnect] switch explained in "Placement of a Display Area to Show
Remote Desktop Window" (page 19-17) does not work to turn off the remote desktop window that
was displayed by a switch or the macro command.
• If any part placed behind a remote desktop window is updated, the part will be displayed over the
window.
• While a remote desktop window is displayed, any switches placed behind the window do not work.
(Those switches work when no remote desktop window is displayed.)
• The display of a remote desktop window is always based on the upper left corner of the server
(computer) screen as the start point.
• If a remote desktop window display area shows an image smaller than the area, the margin of the
area turns black.
• While a remote desktop window is displayed in a display area, turning it off leaves the area in the
color as set in the V-SFT.
• When a remote desktop window is displayed by a switch or the macro command, tuning it off will
clear the window as well as its display area.
• When a remote desktop window is initially displayed, the image is scaled to 100%.
• Once a remote desktop window is turned off, the settings for the [S] menu will return to the
defaults.
• When a remote desktop window is turned off by a switch or the macro command, the V8 screen is
refreshed. If there is an overlap being displayed then, it will be deleted at the same time.
However, the overlap remains if [
Settings] tab window ([System Setting] → [Unit Setting] → [General Settings]).
• While a remote desktop window is displayed, switching to the Main Menu screen turns the window
off.
• While the auto-reduction function is used to display a screen of the target server (computer), the
scroll bar (S menu) cannot be displayed.
• For the V806 series, the auto-reduction function is available in the range 800*600 (SVGA) -
1024*768 (XGA).
• The auto-reduction function adjusts the display of a computer screen to the display area of the
remote desktop window on the V8 unit, provided that the length and the height of the display area
is at the ratio of 4 to 3. (At a ratio other than this, an empty area painted black will be left in the
display area.)
Display Overlap during bit ON] is checked in the [General
19
Remote Desktop
Display on-startup] is
19-27
19
Advertisement
Table of Contents
