FE MONITOUCH V8 SERIES Reference: Additional Functions page 495

27 Ladder Transfer via USB or Ethernet
LadderComOp Installation
Ladder transfer via USB/Ethernet is available, provided that the dedicated tool, "LadderComOp", is
installed on the computer.
If you install the "LadderComOp" from the V-SFT-5 CD, perform the procedure below from step 1. If
you have downloaded the "LadderComOp" from our website, double-click the "LadderComOp".exe on
your computer and perform the procedure from step 2.
1. When the V-SFT-5 has been installed, the following dialog is displayed*. Click the [Yes] button.
* The V-SFT-5 version 5.3.0.0 or later supports the function.
2. Click the [Next] button.
3. Select the location of where to install the tool and click the [Next] button.
4. Click the [Install] button.
27-4