Table of Contents
Advertisement
17.2
Two Ethernet Ports
Setting Procedure
IP Address Setting
Two IP addresses must be set for the built-in LAN port and the Ethernet unit.
Click [System Setting] → [Ethernet Communication] → [Local Port IP Address].
The [IP Address Setting] dialog is displayed.
For the built-in LAN port
Set the items in the [IP Address Setting] tab window for the built-in LAN port.
For the Ethernet unit
Set the items in the [IP Address Setting (extended)] tab window for the Ethernet unit port.
The included items are the same between the [IP Address Setting] and [IP Address Setting
(extended)] tab windows.
For more information, refer to the V8 Series Connection Manual.
17-6
Advertisement
Table of Contents
