FE MONITOUCH V8 SERIES Reference: Additional Functions page 494

Setting Items
LadderComOp Setting
• "LadderComOp" Installation
• [Ladder Transfer Setting] in "LadderComOp"
- [Ladder Transfer Setting] in "LadderComOp"→ page 27-7
- [Ladder Transfer Setting] in "LadderComOp"→ page 27-9
About LadderComOp
This is an application required for ladder transfer via USB/Ethernet.
LadderComOp.exe can be installed when the V-SFT-5 is installed from the CD. Or, it
can also be downloaded from the Hakko Electronics website at
http://www.monitouch.com.
V-SFT Setting
• [Device Connection Setting]
- Ladder Transfer via USB
- Ladder Transfer via Ethernet
PLC Programming Software Setting
• COM port setting → page 27-10
27 Ladder Transfer via USB or Ethernet
→ page 27-4
→ page 27-6
→ page 27-8
27
27-3