FE MONITOUCH V8 SERIES Reference: Additional Functions page 48

Designate Internal:
(Internal, External) An overlap display can be shown or hidden by pressing a switch placed
on the screen or using a macro command.
External:
An overlap display can be shown or hidden by specifying an overlap
library number in memory. In this case, the display position can also be
specified by an external command.
Info Output Memory Specify the desired memory address.
The overlap library number currently shown on the screen is stored in the
top memory address "n". When no overlap display is shown, "-1" is stored.
If [Internal] is selected for [Designate], one word of top memory address "n"
is used.
If [External] is selected for [Designate], a maximum of four words from top
memory address "n" is used.(n to n+3)
Overlap Library No. This is valid only when [External] is selected for [Designate].
A memory address of [Info Output Memory] "n + 1" is automatically
allocated.
Specify the overlap library number to be displayed in advance.
Method
Switch Function: Multi-Overlap Display
Function: Overlap Display (OFF)
Macro SET_MOVLP
OVLP_SHOW
Method
Read area Bits 3 of read area "n + 1"
"n + 1" (1: show, 0: hide)
Target library
designation
Coordinate
designation
Command Command Memory Bit 0
Memory (1: show, 0: hide)
Target library
designation
Coordinate
designation
2 Global Overlap
Details
→ Show
→ Hide
→ Show
→ Hide
Details
Overlap Library No.
(= Info Output Memory "n + 1")
This is valid only when [
Coordinate Designation] is
checked.
(= Info Output Memory "n + 2",
"n + 3")
Overlap Library No.
(= Info Output Memory "n + 1")
This is valid only when [
Coordinate Designation] is
checked.
(= Info Output Memory "n + 2",
"n + 3")
2
See:
page
2-5
page
2-5
See:
page
2-6
page
2-6
2-3