Table of Contents
Advertisement
21.2
Operation Log Viewer
3. Check the box for [
The dialog shown below is displayed.
Yes
No
Cancel
4. When the settings have been completed, click [OK].
5. Place the switch used to read the operation log viewer screen ([Function: Screen]).
* For description of the registered log viewer screen, refer to "Log Viewer Screen" on page 21-17.
21-16
Operation log viewer].
The operation log viewer part will be stored at the location as specified in the
message.
The [Screen] dialog appears and you can select a screen number arbitrarily.
The box for [
Operation log viewer] becomes unchecked.
• If you wish to change the screen registration location, go to the [Operation log
setting] dialog, press the [Re-register] button, and perform the above steps 3 and
4. Do not move the screen by manual operation. Do not change or modify any
part that has been automatically registered.
If any changes have been made by the user, there will be no guarantee of proper
operation.
• The log data will be displayed in the display area. The size of the area is fixed.
Note that a display area of this fixed size will be automatically registered with a
screen.
Advertisement
Table of Contents
