Table of Contents
Advertisement
25.2
Memory Batch Change
Step 2
Check [No. 0] and click the [Detail Setting] button.
* For more information on the [Option] button, refer to the V8 Series Operation
Step 3
The [Memory Setting] dialog is displayed.
Step 4
Check either [Memory Designation] or [Memory Count Designation] as desired. Specify
memory locations in the following fields of [Before Change] and [After Change].
• [Memory Designation] checked:
• [Memory Count Designation] checked:
Step 5
Click [OK].
25-4
Manual.
The [End Memory] location is
displayed according to the value
of [Memory Count] you set.
Advertisement
Table of Contents
