FE MONITOUCH V8 SERIES Reference: Additional Functions page 281

19 Remote Desktop
Macro Command to Show/Hide Remote Desktop Window
The following macro commands are provided to show/hide or switch the window of a target remote
server (computer).
SET_REMOTEDT F0 F1
Function: Showing/hiding a remote desktop window
This macro command is used to show/hide the window of a computer (server) provided with remote
desktop table No. [F1] specified in the [Remote Desktop Table Setting] dialog, according to [F0].
Available memory
F0
F1
Range
F0
F0 + 1
F0 + 2
F0 + 3
F0 + 4
F1
Example
Display in an area based on the specified coordinates (V812S, remote desktop table No. 10):
$u00100 = 2 (W)
$u00101 = 0 (W)
$u00102 = 0 (W)
$u00100 = 400 (W)
$u00100 = 300 (W)
SET_REMOTEDT ($u00100, 10)
19-20
Internal Memory
0: Hide
1: Same-sized display
2: Same-sized display (based on the specified coordinates)
3: Automatically reduced display
4: Automatically reduced display (based on the specified
coordinates)
X coordinate as the start point
Y coordinate as the start point
Width
Height
0 to 255: Remote desktop table number
for same-sized
display based on the
specified coordinates
for X coordinate as
the start point
for Y coordinate as
the start point
for width
for height
Remote desktop table number
PLC1 - PLC8
Memory Card
Memory
: Setting enabled (indirect designation disabled)
: Setting enabled (indirect designation enabled)
Value
Start point (0, 0)
Remote desktop
window
Constant
Remarks
Valid when F0 =
2 or 4
(400, 0)
(0, 300)
(400, 300)