Table of Contents
Advertisement
18
Network Camera
User Name and Password Check and Registration
When a password has already been registered, the [Password] field is blanked out.
Be careful in password management. If you forget the password, a password newly registered is
usable for authentication.
In a case where [
area, the user name and the password registered for the administrator or a general user in the network
camera setting tab window must be set in the V-SFT software.
For more information on the authentication settings, refer to "Authentication Setting" (page 18-21).
* Login with the administrator-level user name and password is required to proceed to the
following tab window setting.
For the administrator
1. Click the [Setup] tab.
2. Go to the [Account] menu at the left of the screen. Click [Administrator].
3. Review the settings in the [Administrator Authentication] area.
4. If any changes are made to these fields, click [Save] to save the changes.
2.
18-24
Do not permit access from guest users] is checked in the [General Authentication]
1.
3.
4.
Advertisement
Table of Contents
