Word Lamp - FE MONITOUCH V8 SERIES Reference: Additional Functions

4 Lamp
Overview
• A maximum of 128 patterns (pattern 0 to 127) can be registered for one lamp part (including the
one in the switch part).
• The lamp display can be changed by bit ON/OFF operation or pattern number designation.
Usage Example
Register 128 patterns for the lamp part in advance.
Pattern 0
(OFF)
Operation
Stop
Pattern 127
(P128)
Production
Stop

Word lamp

Lamp part:
Lamp memory:
Number of patterns: 128
<Status Monitor Screen>
When "0" is set for D100 in the PLC
memory, pattern 0 is displayed.
* When a value outside the specified range is set on MONITOUCH, the lamp display is
not changed.
Pattern 1 Pattern 2
(ON) (P3)
Operation
Tank Error
Start
Pattern 126
(P127)
Preparing
1
D100
Set "3" for D100.
D100 0
D101
Operation
Stop
Pattern 3 Pattern 4
(P4) (P5)
Temperature Temperature
Rise Drop
(P8)
Ground
Fault Hazard
D100 3
D101
<Status Monitor Screen>
Temperature
Rise
Set "3" for D100 in the PLC memory.
Pattern 3 is displayed.
4 Lamp
Pattern 5
(P6)
Pressure
Drop
Pattern 6
(P7)
Voltage
Drop
( ): bit lamps
4-1
4