Table of Contents
Advertisement
19
Remote Desktop
19.4 V-SFT Setting
If you transfer screen data provided with remote desktop table settings to the V8 series, with which no
license is registered, "Warning: 214" will be issued to the V8. For more information on license
registration, refer to "Registering/Unregistering the License" (page 19-12).
[Remote Desktop Table Setting] Dialog
Proceed to the registration of the computer (server) that is connected to the V8 series.
Click [System Setting] → [Remote Desktop Table Setting]. The [Remote Desktop Table Setting] dialog
is displayed.
Local Port No.
Computer Name
IP Address
LAN Port No.
Password
Auto-reduction
PC resolution
The password to be entered here must be the same as that set in the UltraVNC.
(Refer to step 22 in "UltraVNC Installation and Setting" (page 19-4)).
19-14
Select a local port number for the V8 series.
This port is used as a sending/receiving port for remote desktop window display
(default: 8050, range: 1024 to 65533).
Specify the name of the server (computer).
Specify the IP address of the server (computer).
Specify the port number of the server (computer) (default for UltraVNC: 5900).
Specify the password. Typing the password shows eight asterisks (one-byte
254 alphanumerics maximum).
Check this box when you zoom out a computer screen to show it entirely.
When [
Auto-reduction] is checked, specify the resolution of the computer.
(800*600, 1024*768, 1152*864, 1280*1024, 1600*1200, or specify a width in the
800-1600 range and a height in the 600-1200 range)
Advertisement
Table of Contents
