FE MONITOUCH V8 SERIES Reference: Additional Functions page 415

24 Tag
No.
6 Address
7 Comment
*1 Data including unusable characters cannot be imported.
For more information on characters to be used, refer to "Configuration of the [Tag Database Edit]
Window" (page 24-4).
24-10
Item
PLC memory
Example: PLC1 MITSUBISHI ELECTRIC D100
• 1:1 connection
Word designation: PLC1 [D00100]
Bit designation: PLC1 [D00100-00]
• 1:n connection (port No. 0)
Word designation: PLC1 [0: D00100]
Bit designation: PLC1 [0: D00100-00]
Internal memory: $u/$T/$s/$L/$LD
Example: Internal memory $u100
Word designation: $u00100
Bit designation: $u00100-00
Memory card memory
Example: File No. 0, Record No. 0, and Data No. 100
Word designation: [0:0] #0100
Bit designation: [0:0] #0100-00
I/O memory
Example: PLC1 Fuji Electric T-link TI00
Word designation: PLC1 [TI00]
Bit designation: PLC1 [TI00-00]
The following settings are enabled only when the
general-purpose FL-Net is designated as PLC1.
Common memory: CW/CB/MW/MB/VW
Example:
• Specifying CW100
Word designation: PLC1 [CW0100]
Bit designation: PLC1 [CW0100-00]
• Specifying MW100 (port No. 1)
Word designation: PLC1 [1: MW0100]
Bit designation: PLC1 [1: MW0100-00]
*1
Within 32 one-byte characters
Description
PLCx[xxxxx]
Device + memory address
PLC No. 1 - 8
xxxxx
Device + memory address
[xx:xxxx]#xxxx
Data No. 0 - 4096
Record No. 0 - 4095
File No. 0 - 15
PLCx[xxxxx]
Device + memory address
PLC No. 1 - 8
PLCx[xxxxx]
Device + memory address
PLC No. 1 - 8
Remarks
1-byte
1-byte /
2-byte