FE MONITOUCH V8 SERIES Reference: Additional Functions page 89

7.2 Panel Meter (Extended)
Complete Round
Circle
Outer radius
Inner radius
Change Part
Customize
7-6
Check this box to make a complete round graph area.
Unchecked (sector)
Start
Angle
End
Angle
*1
Set the radius of the outer circle of the panel meter.
Center
*1
Set the radius of the inner circle of the panel meter.
Center
Used for changing a part design of the panel meter.
A desired bitmap file can be used for the panel meter design. The selected
bitmap file is stored in ".\V-SFT-5\Parts\User".
For the detailed procedure, refer to "Customizing the Indicator and Scale"
(page 7-10).
Checked (complete round circle)
Graph area
Set the start angle.
This setting is active only
when [ Complete Round
Circle] is not checked.
Set the end angle.
Outer circle
Radius of the outer circle
Inner circle
Radius of the inner circle
Example: [Start Angle: 180],
[End Angle: 0]
Start Angle
End Angle
* Panel meter area: Area
circularly enclosed
from the start angle to
the end angle in the
clockwise direction