FE MONITOUCH V8 SERIES Reference: Additional Functions page 420

Setting Procedure
This section describes the procedure to specify "5" for [Number of Elements] for the PLC1 memory
"D200", and "3" for the integer variable in the array format.
1. Check the box for [Array].
2. Specify the number of elements for [Number of Elements].
• A maximum of 4096 elements can be set.
• If the bit variable is specified in the array format, 1 word is occupied in the variable
area even if "16" or smaller number is specified for the number of elements.
For more information, refer to ""Tag" Variable Capacity" (page 24-22).
3. Enter a comment for each element as desired.
Move the cursor to the corresponding ID number, click [Edit] → [Detail Setting], and enter a
comment in the [Comment] field on the [Detail Setting] dialog.
Total [0] (= D200)
Total [1] (= D201)
Total [2] (= D202)
Total [3] (= D203)
Total [4] (= D204)
The [Detail Setting] dialog can also be displayed by the procedure shown below.
• Right-click the mouse and click [Detail Setting].
• Double-click the ID number.
D200-D204 are used.
3 words are occupied
in the variable area.
24 Tag
24
24-15