FE MONITOUCH V8 SERIES Reference: Additional Functions page 172

To Return Screen BIN Data to the Computer
To return screen BIN data in the "SCRN" folder to the original data file, the following files are required.
DAT0000
BITMAP
CARD
DSP
DSP0000.BIN
FONT
HDCOPY
SAMPLE
SCRN
SC0001.BIN
SC0002.BIN
SCHEADER.BIN
SNAP
SRAM
* However, if data information of "DSP0000.BIN" in the "DSP" folder does not match that of
"SCHEADER.BIN" in the "SCRN" folder, data will not be combined and screen data is returned
while the screen BIN data in the "SCRN" folder is missing.
To return to the original data file, it is necessary to convert "DSP0000.BIN" in the "DSP" folder.
Follow the steps below:
Step 1 Start V-SFT.
Select [File] → [CF Card Manager].
Step 2
The dialog for specifying the CF card drive is displayed.
Step 3 Specify the drive where the CF card is inserted and click [OK]. The CF Card Manager
will start.
Step 4 Check that "DSP0000.BIN" (BIN file) exists in the "DSP" folder in the access folder, and
select the file.
14.1 Screen Data File Capacity Increased
xxxxxxx.V8
The "DSP0000.BIN" file in the "DSP" folder
and the files in the [SCRN] folder are
combined into the original data file.
14
14-5