Table of Contents
Advertisement
27 Ladder Transfer via USB or Ethernet
Overview
You can write or monitor PLC ladder programs via the V8i or V8 series using the USB port or Ethernet.
• Ladder transfer via USB
V8
F 1
F 2
F 3
F 4
SYSTEM
PLC
• Ladder transfer via Ethernet
PLC
* For information on the available PLC models, refer to "Available PLC Models" (page 27-2).
Ladder transfer is enabled, provided that [PLC1] is selected as the connection target PLC in
the [Device Connection Setting] dialog in the V-SFT.
USB cable
USB-B
F 5
F 6
F 7
Ladder program/monitor, etc.
V8i
F 1
F 2
F 3
F 4
F 5
F 6
F 7
SYSTEM
Ladder program/monitor, etc.
27
Ladder Transfer via USB or Ethernet
PLC ladder
USB-A
software
Computer
Computer
PLC ladder
software
27
Ethernet
27-1
Advertisement
Table of Contents
