Table of Contents
Advertisement
3
Switch
3.1
Multi-function
Overview
In regards to a switch placed on a screen, which is provided with the [Write] or [Word Operation]
function, you may also enable the switch to work as a screen change switch. To accomplish the
screen change function of the switch in a conventional manner, the macro command SET_SCRN must
be used as the switch ON (or OFF) macro.
However, in accordance with the multi-function switch setting discussed hereafter, a switch can easily
be capable of two functions.
Targeted Switches
• Switches with the following setting: Under [Function] in the [Switch] dialog, [Entry] and [Write] or
[Standard] and [Word Operation] are selected.
Location for Setting
Click the target switch. Its [Switch] dialog is displayed.
When [Write] or [Word Operation] is selected under [Function], the [
the dialog becomes active.
* When a switch that works for [Write] or [Word Operation] is provided with [
setting, pressing the switch implements the action of [Write] or [Word Operation] first and
then a screen change.
3.1
Multi-function
Screen] field at the bottom of
Screen]
3
3-1
Advertisement
Table of Contents
