Table of Contents
Advertisement
6.2
Slider Switch
Define detent steps
by the size of the
item.
No. of Divisions
(2 to 1024)
Scale
[Style] tab window
Edit Parts
(Rail + Slide, Rail,
Slide)
Color
Change Part*
* Parts change can be executed by selecting an option on the [Modify Part] window.
Select a slider switch and select [Edit] → [Change Part] → [Modify Part]. The dialog shown below
is displayed. Select [Edit a rail] or [Edit a slider].
6-8
When this check box is checked, the number of divisions for the rail is
automatically defined according to the size and scale value of the rail.
Specify the number of divisions of the rail.
If the size of the rail is smaller than the number of divisions, the rail is
divided into the number defined in the case where [
the size of the item.] is checked.
Specify the setting range available for the slider switch. It is also possible to
make it variable by specifying the memory address.
Select the part whose
design is to be changed.
Change the color of the part which is selected for [Edit Parts].
(This is valid only when [Rail] or [Slide] is selected.)
Press this button to apply changes to the part selected for [Edit Parts].
For more information, refer to "3.6 Parts" in the V8 Series Operation
Manual.
Define detent steps by
Rail
Slide
Advertisement
Table of Contents
