Table of Contents
Advertisement
Network Table
In a case where MONITOUCHs are connected as illustrated below, they may communicate with one
another using macro commands EREAD and EWRITE (and SEND to send data to the host computer).
Communication in this style requires the registration of the IP addresses of the MONITOUCHs (or the
host computer) used as the access targets, in addition to the registration of the local port address.
Network table registration must therefore be registered.
Ethernet
Ethernet unit
172.16.200.xxx
Ethernet
V8i
Network table registration
When you use the two ports, go to the [Network Table Edit] window and register network tables (click
[System Setting] → [Ethernet Communication] → [Network Table]).
SYSTEM
F 1
F 2
V8i
V8i
F 3
F 4
F 5
F 6
F 7
SYSTEM
F 1
F 2
V8i
F 3
F 4
F 5
F 6
F 7
Built-in LAN port
192.168.1.xxx
SYSTEM
SYSTEM
F 1
F 1
F 2
F 2
V8i
F 3
F 3
F 4
F 4
F 5
F 5
F 6
F 6
F 7
F 7
17.2
Two Ethernet Ports
SYSTEM
SYSTEM
F 1
F 1
F 2
F 2
V8i
F 3
F 3
F 4
F 4
F 5
F 5
F 6
F 6
F 7
F 7
SYSTEM
F 1
F 2
V8i
F 3
F 4
F 5
F 6
F 7
17
17-7
Advertisement
Table of Contents
