FE MONITOUCH V8 SERIES Reference: Additional Functions page 126

V-SFT Setting
1. Select [System Setting] → [Device Connection Setting] and select [Touch Switch].
2. Check the boxes for [ Use Touch Switch] and [ 2 Port].
Both MJ1 and MJ2 must be used.
If either port is used for other purpose, this setting is not available.
3. Select an option for [Connect to:]
GU-11 (Option Unit)
RGB-IN1
RGB-IN2
* Do not uncheck the box for [
Limitations
• When the touch switch emulation of the RGB display function and the remote desktop window
display function are used at the same time, a USB mouse cannot be used for the remote desktop
window.
10 RGB Display (touch switch emulation)
V-SFT Setting
Touch Switch (CH5)
Touch Switch (CH6)
Use Default Comm. Parameter Setting].
Connection Port
MJ1/MJ2
10-3
10