Table of Contents
Advertisement
16
FTP Server
Disconnection
Automatic disconnection
If no command is sent from the FTP client within the time specified for [Input Supervisory Period] in the
[FTP Server Setting] dialog (click [System Setting] → [Ethernet Communication] → [FTP Server]), the
V8 automatically disconnects the connection with the client.
Manual disconnection from V8
By resetting (OFF to ON) bit 0 of $s1072 on the V8, the connection with the FTP client is disconnected
forcibly.
CF
Disconnection from FTP client
The FTP client is disconnected from the V8 when the FTP client logs out.
For more information, refer to "Logout" on page 16-11.
Limitations
Number of FTP Clients
A maximum of three FTP clients can be connected to one V8.
Requests from multiple FTP clients cannot be processed at the same time. They are processed one
by one. Therefore, while an FTP client is transferring a large-size file, another client cannot transfer a
file and must wait until the current file transfer is completed.
File Property Change
Changing file properties (such as a change between write protection and write permission) is not
allowed.
16-20
$s1070-00
SYSTEM
F 1
F 2
F 3
F 4
F 5
F 6
F 7
$s1072-00
Resetting $s1072-00 (OFF to ON) causes logoff.
Logoff occurs.
CF
SYSTEM
F 1
F 2
F 3
F 4
F 5
F 6
F 7
Advertisement
Table of Contents
