Table of Contents
Advertisement
25.7
Selective Transfer
3.
Administrator
[Password]
(within 6
alphanumerics)
4.
User 1 to 4
[Item] and [Password]
25-36
An administrator-level password can be set through this button.
Switching in the [User] field can be password-protected. (No
password protection is provided for switching from "Administrator" to
"User" in the [User] field as detailed in the table below.) Password
protection will prohibit users to change the assignment of transfer
items on their own.
Also when a user attempts to export screen data from the V8 unit, he
or she will be prompted to enter the password for authentication.
Before
change
Administrator
User 1 to 4
User 1 to 4
Administrator
User 1 to 4
* For the assurance of data security, password setting is
recommended.
A password once set cannot be reviewed. Great care should
be taken in password management.
Through the individual buttons, transfer items and a password can be
assigned to each user. (See section 3 (above) for more information
on password.)
A maximum of four users can be set.
a.
Registration
items
* All items other than the registration items belong to [System
Setting].
The items "a." are also included in [System Setting]. Check
an item in "a." if you wish to transfer it independently.
After change
No password
Password-protected
No password
Password-protected
No password
Password-protected
Password
Not required
Not required
Not required
Required
Not required
Required
Advertisement
Table of Contents
