FE MONITOUCH V8 SERIES Reference: Additional Functions page 237

18 Network Camera
[Network Camera Display] Dialog
[Main] Tab Window
Maker
Network Camera
: IP address
Network Camera
: Port No.
(1 - 65535)
Use basic
authentication
User ID
Password
Port No.
(1024 - 65533)
Display Size
(160*120, 192*144,
320*240, 640*480)
Rotate
(0, 90, 180, 270)
18-4
AXIS, Panasonic
Specify the IP address of the network camera.
*1
This item is associated with Panasonic models only.
Specify the port number of the network camera.
In the case where the use of basic authentication is selected for the
network camera, check this box. For more information, read the section
relevant to your network camera.
Specify the user name and the password that have been registered in
the network camera settings. For more information, read the section
relevant to your network camera.
Specify the port number of the V8 unit.
Three consecutive port numbers from what is specified are used.
*2
Select a display size.
* The size of 192*144 is selectable for Panasonic models only.
Specify the rotation angle of the displayed image. Make the selection
appropriate for the condition of the network camera installed. When the
image display part is linked to the camera icon in the editor software,
the part will also be rotated according to this angle setting.
* Only "0" or "180" is selectable for Panasonic models.