Table of Contents
Advertisement
Step 7
The following window is displayed.*
Selection order numbers appear at the top-left corners of the numerical data display parts
([Function: Entry Target]). Click the numerical data display parts one by one to set their
order numbers. Once an order number has been set at the top-left corner of a data
display part, the number turns yellow.
* This window is provided solely for setting selection order numbers of display
parts. To exit, select [Finish] or [Cancel] from the right-click menu.
Step 8
When changing the start number of selection order, select [Change Start No.] from the
right-click menu. Select your desired number for [Start No.] and click [OK].
Now order numbers starting from the newly specified number are allocated.*
* Even if the top-left numbers are confirmed (in yellow), changing the [Start No.]
restores the numbers starting from [Star No.] to the unconfirmed status (in
gray).
Example: [Start No. 6]
When entirely re-setting the selection order numbers, click [Cancel] from the
right-click menu. Perform the previous steps again from step 1.
25.3
Order INC
Confirmed: In yellow
Unconfirmed: In gray
Click
Selection order Nos. 6 to 9 are
restored to the status before
change, showing "0" in gray.
Selection Order Batch Change
25-15
25
Advertisement
Table of Contents
