FE MONITOUCH V8 SERIES Reference: Additional Functions page 252

Network Camera Setting
IP Address Check and Change
* Login with the administrator-level user name and password is required to proceed to the
following tab window setting.
1. Click the [Setup] tab.
2. Check that [Network (IPv4)] is selected in the [Basic] menu at the left of the screen. Go to the
[Connection Mode] area and click [Static].
3. Make settings of the network camera port number*, IP address, subnet mask, and gateway.
* The default port No. is 80. Enter a port number in the 1 to 65535 range.
4. Click [Save] to save the settings made in the previous steps.
3.
1.
2.
4.
18 Network Camera
18-19
18