FE MONITOUCH V8 SERIES Reference: Additional Functions page 497

27 Ladder Transfer via USB or Ethernet
Ladder Transfer via USB
This section describes the settings for ladder transfer using the QnH (Q) series as an example.
[Device Connection Setting] in V-SFT
1. Click [System Setting] → [Device Connection Setting]. The [Device Connection Setting] dialog is
displayed.
2. Open the [Ladder Transfer Port] tab window.
Check the box for [
3. The necessary settings have been completed. Transfer the screen data to the V8 series.
27-6
Use Ladder Tool] and select [USB B] for [Connection].
When transferring the screen data using the USB cable, be sure to display the Main
Menu screen on the V8 series. Ladder transfer (monitor) is possible only when the RUN
screen is displayed.