FE MONITOUCH V8 SERIES Reference: Additional Functions page 254

Authentication Setting
Authentication setting is made to permit or prohibit access from anonymous users.
This setting enables you to deny access from anonymous users.
* Login with the administrator-level user name and password is required to proceed to the
following tab window setting.
1. Click the [Setup] tab.
2. Go to the [Account] menu at the left of the screen. Click [Administrator].
3. In the [General Authentication] area, choose either [Permit access from guest users] or [Do not
permit access from guest users].
Permit access from guest
users
Do not permit access from
guest users
4. Click [Save] to save the setting made in the previous step.
3.
2.
When the option [Do not permit access from guest users] is checked, make the following settings in
the V-SFT software. As shown below, check [
ID and the password as already registered. To see the registered user ID and password, refer to
"User Name and Password Check and Registration" page 18-24.
This option allows anyone to access the network camera
without the user name and the password.
Whenever you attempt to access the network camera, the
authentication dialog appears. By entering the user name and
the password as registered, you are granted access to the
network camera.
1.
4.
Use basic authentication] and then enter the user
18 Network Camera
18-21
18