FE MONITOUCH V8 SERIES Reference: Additional Functions page 78

Setting Procedure
Select [Parts] → [Slider Switch] to place a slider switch part on the screen.
(Alternatively you can place it by selecting [Slider Switch] on the [Parts List] window that is displayed
by selecting [Parts] → [Parts List].)
Setting Dialog
[Main] tab window
Memory Specify a memory address to be changed by the slider switch.
Data Length Select the data length of the memory address.
(1-Word, 2-Word)
Input Type Select a code type to be used when importing data into the V series.
(BCD, DEC)
Direction Select a sliding direction.
(↑, ↓, →, ←)
6.2 Slider Switch
6
6-7