FE MONITOUCH V8 SERIES Reference: Additional Functions page 485

26.4 USB Keyboard
3. The Keyboard Selection screen is displayed.
Select the language to be used for the keyboard, and press the [Setting Finished] switch.
4. The I/O Test screen is displayed again.
Press the [Return] switch to move back to the Main Menu screen.
The settings on the MONITOUCH have been completed.
Settings on the Editor
Setting Item
[Entry] icon
Entry Target
An [Entry] icon must be registered on the screen where the USB keyboard is to be used.
In addition, numerical data or character display parts of [Display Function: Entry Target] are required.
26-8
Mandatory / As Required
Mandatory
Mandatory
SYSTEM
F 1
F 2
F 3
F 4
F 5
F 6
← Press [Setting Finished] to end.
F 7
Setting Procedure
Place an [Entry] icon on the screen
where the keyboard is to be used.
When entering characters through the
keyboard, register [Entry Target] for
character display; when entering
numerical data through the keyboard,
register [Entry Target] for numerical
data display.