FE MONITOUCH V8 SERIES Reference: Additional Functions page 83

6.3 Numerical Data Entry (Numeral Insertion/DELETE Keys Enabled)
Keypad
The keys of the keypad work as described below.
Key Function
Character Input
Write
Clear
+/-
Back Space
Delete
Cancel
←
→
6-12
0 to 9, A to F, +, -, .
In a condition immediately after a selection with the cursor,
pressing any of these key clears the existing data and enters
the data of the key you pressed.
When the cursor has been moved by the switch function of the
arrow key "←" or "→", a numeral can be put at the place
determined with the cursor. A decimal number can be
displayed with the "." key. The cursor is then movable through
the whole number part and the fractional part.
This key writes the entered data to the specified memory.
This key clears the entered data.
This key inverts the sign of the entered data.
This key deletes one numeral to the left of the cursor.
However, this key does not delete the leftmost numeral of the
whole number part as well as the tenth place of the fractional
part.
When a numeral is deleted from the whole number part, the
cursor remains in the same place. When a numeral is deleted
from the fractional part, the cursor is moved left one space and
"0" is put at the rightmost place of the fractional part.
Example:
Deletion of "4" from "12.345" results in "12.350".
This key deletes one numeral at the cursor.
After a deletion with this key, the cursor remains in the same
place.
When the leftmost numeral is deleted from the whole number
part, "0" is put at the place. When one numeral is deleted from
the fractional part, "0" is put at the rightmost place.
Pressing this key while data is being typed returns the display
to the previous data.
This key moves the cursor left one space.
The cursor is not put over the decimal point.
This key moves the cursor right one space.
The cursor is not put over the decimal point.
Action Remarks
2-byte valid
Unable to
delete
decimal point
and signs
Unable to
delete
decimal point
and signs