13 Fonts
13.1 Font Setting
Select [System Setting] → [Font Setting]. The [Font Setting] dialog is displayed.
In the [Font Setting] dialog, set the number of languages to be displayed and the font to be used on the
MONITOUCH.
1.
2.
3.
1. Font selection
2. Setting
3. The number of
interface languages
Select the desired font from [Bitmap font], [Gothic font] and [Stroke font]
first.
(For the information on the differences among fonts, refer to the next
section.)
Set the font to be used for each language.
For the operating procedure, refer to the next page.
Set the number of interface languages. A number up to 16 can be
registered.
13.1
Font Setting
13
13-1