Table of Contents
Advertisement
25.5
Cross-reference
Step 4
In the [Cross-reference] view, double-click your desired item, or select an item and click the
[VIEW JUMP] icon.
A jump is made to the screen where the above-selected item is included. The dialog of the
item is also displayed.
* The item dialog is not displayed when [Prohibit Item View Display by Single Click] is
Step 5
When you intend to repeat searching, click the icon "2" and follow steps 2 through 4.
1. 2. 3. 4.
25-28
selected in the [General] tab window that is displayed by selecting [File] → [Property].
5.
Double-click
or
click the [VIEW JUMP] icon.
A jump is made to the relevant screen
and the item dialog is displayed.
1. Display Only Top
When an item targeted for search
is used at multiple locations, only
the first location is displayed.
2. Search Item Setting
The [Search Item Setting] dialog is
displayed.
3. Update
The view is updated.
4. VIEW JUMP
A jump is made to the screen
where the selected item is
included.
5. Item for search
The item being searched for is
displayed.
Advertisement
Table of Contents
