Table of Contents
Advertisement
19
Remote Desktop
Switch to Show/Hide Remote Desktop Window
With the use of a switch placed on the screen, the window of a target server (computer) can be shown
in and hidden from an area at the specified coordinates. In the [Switch] dialog for such a switch, select
[Standard] and [Remote Desktop Show/Hide] under [Function].
* Function switch setting is disabled.
Switch
Function
Standard
*1 The [
dialog.
For more information, refer to "[Remote Desktop Table Setting] Dialog" (page 19-14).
19-18
Switch Function/
Auxiliary Setting Item
Remote Desktop Show/Hide
Specify with
Mouse
Start X
Start Y
Width
Height
Remote
Desktop
Table No.
Auto-
reduction
on start-up
Auto-reduction] box is required to be checked in the [Remote Desktop Table Setting]
Description
Each time the switch provided with this function is
pressed, the display of a remote desktop window is
enabled and disabled.
The mouse is used to specify the position where a
remote desktop window is displayed.
Specify an X coordinate as the start point where a
remote desktop window is displayed.
Specify a Y coordinate as the start point where a
remote desktop window is displayed.
Specify the width of the area where a remote
desktop window is displayed.
Specify the height of the area where a remote
desktop window is displayed.
Specify the table number of the target server
(computer) that has been registered in the [Remote
Desktop Table Setting] dialog.
A computer screen is automatically zoomed out for
*1
its entire display.
Advertisement
Table of Contents
