FE MONITOUCH V8 SERIES Reference: Additional Functions page 171

14.1 Screen Data File Capacity Increased
Step 7 When completing the setting, click [OK].
The files shown are saved in the "SCRN" folder under the access folder on the CF card.
3. Operations on MONITOUCH
Insert the CF card with screen BIN data that is saved as described above into the MONITOUCH.
When opening a screen on the MONITOUCH, the CF card is automatically referenced for the screen.
* If screen BIN data is not stored correctly on the CF card or if the CF card is not inserted into the
MONITOUCH, the MONITOUCH recognizes that there is no screen BIN data present.
If you press the [Function: Screen] switch, an error beep sounds and the switch operation cannot
be accepted. If a screen number is specified in the read area from the PLC, the screen will not be
displayed. (If this occurs immediately after the power is turned on, the error message "Screen No.
Error" will be displayed.)
"SCRN" Folder
The "SCRN" folder contains the following files:
SCHEADER.BIN
SCxxxx.BIN
MCRxxxx.BIN
MSGxxxx.BIN
* In addition to the folder shown above, the "DSP0000.BIN" file stored in the "DSP" folder is also
required when returning the screen files from the CF card to the computer.
For more information, refer to the next page.
14-4
CF card
(Access folder)
DAT0000
BITMAP
CARD
DSP
FONT
HDCOPY
JPEG
MEMO
MSG
RECIPE
SAMPLE
SCRN
SC0001.BIN
SC0002.BIN
SCHEADER.BIN
SNAP
SRAM
WAV
WEBSERV
Header file
Screen file
Macro block file in a component part
Sampling message file in a
component part
SCxxxx.BIN: Screen BIN data
xxxx = Screen No.: 0 to 9999
SCHEADER.BIN: Header file
xxxx = Screen No.: 0 to 9999
xxxx = Block No.: 0 to 1023
xxxx = Buffer No.: 0 to 11