Table of Contents
Advertisement
16
FTP Server
Login
This section explains the steps needed to log in and demonstrates how to operate the FTP tools.
To begin, prepare your MONITOUCH as instructed below.
1. Transfer the screen data, for which the [FTP Server Setting] is finished, to MONITOUCH (the V8i
series).
2. Connect your computer to MONITOUCH via Ethernet.
3. Insert a CF card into MONITOUCH and set the unit to the RUN mode.
With the Command Prompt
Click [Start] → [Programs] → [Accessories] → [Command Prompt].
Step 1
[Command Prompt] starts.
Step 2
Enter the FTP command.
Key in "ftp", a one-byte space, and the MONITOUCH IP address. Press the Enter key.
16-6
Advertisement
Table of Contents
