FE MONITOUCH V8 SERIES Reference: Additional Functions page 416

Importing a CSV File for Siemens S7-200
CSV-format files that are copied from SIMATIC STEP 7-Micro/WIN (software for Siemens S7-200) can
be imported to the screen data.
* The above-mentioned import is allowed on a condition that "Siemens S7-200 PPI" is
specified for connection target PLC1 in the [Device Connection Setting] dialog ([System
Setting] → [Device Connection Setting]). The import is not allowed if "Siemens S7-200 PPI"
is specified for PLC2 or after.
Procedure
1. Start the software SIMATIC STEP 7-Micro/WIN for Siemens S7-200.
2. Open [Symbol Table].
* Memory addresses unavailable with the V8 cannot be imported.
For more information on memory addresses available with the V8, refer to the V8 Series
Connection Manual. Note that double-word addresses are imported as one-word
addresses.
Addresses: VD → VW, ID → IW, QD → QW, MD → MW, SMD → SMW, SD → SW
3. Select all columns under [Symbol], [Address], and [Comment]. Right-click and select [Copy] from
the right-click menu.
Select all.
24 Tag
24
24-11