5.2 Transport Unit Removal
1. Remove the rear cover (2 screws) and the toner collection bottle.
2. Disconnect the connectors from the following components:
TC/SC power pack [A]:
Quenching Stabilizer [B]:
PCC power pack [C]:
3. Lower the power pack bracket [D] (TC/SC, PCC, Stabilizer) (2 screws).
4. Remove the vacuum fan duct [E] (1 screw), disconnect the two white connectors (2P &
6P) [F], and remove the ground wire [G] (1 screw).
Two 1P White
3P Red
3P White
1P White
5-37
31 August 1989