Original - Binding Position; Output-Binding Position; Edge Erase - Fuji Xerox DocuCentreS2520 User Manual

5 Copy

Original - Binding Position

You can set the position when binding documents.
1
Select [Original - Binding Position], and then
press the <OK> button.
2
Select the binding position, and then press the
<OK> button.
 Flip on Long Edge
Binds the long edge of document in portrait
orientation.
 Flip on Short Edge
Binds the short edge of document in landscape orientation.
Output - Binding Position
5
You can set the position when binding output copies.
1
Select [Output - Binding Position], and then press
the <OK> button.
2
Select the binding position, and then press the
<OK> button.
 Flip on Long Edge
Binds the long edge of document in portrait
orientation.
 Flip on Short Edge
Binds the short edge of document in landscape orientation.

Edge Erase

You can set to erase the black shadows created around the edge of paper when copying with
the document cover open or copying a bound document.
You can set a value between 0 and 40 mm (in 1 mm increments) for the Edge Erase function.
Note
112
• The value set for Edge Erase applies to all four edges of the document.
• For ID card copy, the Edge Erase is set separately. For more information, refer to "Edge Erase"
(P.153).
Copy
Reduce/Enlarge... Auto
Original Size... Auto
Flip on Long
Original-Binding...
Original-Binding Position
Flip on Long Edge
Flip on Short Edge
Copy
Original Size... Auto
Flip on Long
Original-Binding Po...
Flip on Long
Output-Binding Posi...

Output-Binding Position

Flip on Long Edge
Flip on Short Edge
1
111 1
Qty.
1
1
111
1
Qty.
1