Scanning An Image From The Docuprint C2090 Fs; Scanning To Ftp - Fuji Xerox DocuPint C2090 FS User Manual

2. Use the <◄/►> buttons to select image quality resolution, it can support 150 dpi, 300 dpi, 600 dpi, or
1200 dpi resolution in DocuPrinter C2090FS
3. Press <Set> button to confirm your choice.
5.2.5

Scanning an image from the DocuPrint C2090 FS

To scan a document, do the following:
1. Open the document cover and place the original document face-down on the document glass. Use
the paper size marks on the left side of the document glass to position a document.
2. Close the document cover gently so that your originals do not move.
3. Use the <◄/►> buttons to specify if you want to scan to local PC or network PC.
4. Press <Set> to confirm your choice.
5. Press the <▲> button to return to [READY] mode.
6. Press <Start> and the scanning task begin.
Note:
• Do not place heavy objects on the document glass or press it with too much force.
5.2.6

Scanning to FTP

Note:
• Before scanning to FTP, make sure the DocuPrint C2090 FS is connected to the Internet and the
settings for FTP server has been properly configured.
To scan a document to FTP (FTP1 to FTP5), do the following:
1.
Press <Scan> then LCD screen shows [Scan Destination – To FTP 1], you can press <Set > to
confirm your setting or use <◄/►> buttons to specify other FTP.
All manuals and user guides at all-guides.com
- 49 -