Brake Pedal Bracket Replacement - GMC chervolet camaro 1999 Service Manual

5-32 Hydraulic Brakes
182814
Brake Pedal Bracket Replacement
Removal Procedure
Brakes
Caution: Refer to Battery Disconnect Caution in
Cautions and Notices.
1 . Disconnect the negative battery cable.
2. Remove the left side instrument. panel insulator.
Re.fer to Insulator Replacement - IP (Left Side) in
Instrument Panel, Gages, and Console.
3. Remove the following components from the pedal
with the bracket. Refer to Stop/amp Switch
Replacement.
• Cruise control release switch
• Stoplamp and Torque Converter Clutch
(TCC) switch
• Cruise control clutch switch or cruise control
clutch anticipate switch
4. Remove the clutch start switch from the brake
pedal with the bracket, if equipped with a
manual transmission.
5. Remove the accelerator pedal (11 ). Refer to
Engine Controls.
6. Remove the following components from the brake
pedal pin (9):
• The brake pedal pushrod pin retainer (5)
• The brake pedal pushrod (6)
• The brake pedal pushrod washer (4)
(