GMC chervolet camaro 1999 Service Manual page 335

2-104 Steering Wheel and Column - Tilt
390527
306318
343889
Steering
• Install the steering column housing support
assembly (2).
Notice: Refer to Fastener Notice in Cautions (
and Notices.
• Install the 4 support screws (1) to the steering
column housing assembly (2).
Tighten
Tighten the 4 support screws to 9 N·m (80 lb in).
• Install the ignition switch assembly. Refer to
Ignition Switch Assembly - Assemble.
• Lubricate the exposed area of the race and upper
shaft assembly (1 ).
• Install the race and upper shaft assembly (1) to
the lower steering shaft assembly (2).
• Align the mark on the race and upper shaft
assembly (1) to the mark on the lower steering
shaft assembly (2).
• Tilt the race and upper shaft assembly (1)
90 degrees to the lower steering shaft
assembly (2) to engage.
• Install the steering shaft assembly to the
steering column.
(