Steering Shaft, Lower Bearing, Jacket- Disassemble - GMC chervolet camaro 1999 Service Manual

Steering
8. Mount the cruise control connector (3) on the
base plate (1 ).
9. Install the column housing cover end cap (2).
10.
Install the steering column lock cylinder set. Refer
to Turn Signal and Multifcn Switch Assembly -
Assemble - Off Vehicle.
Steering Shaft, Lower Bearing,
Jacket- Disassemble
Disassembly Procedure
Tools Required
J 23072 Shift Tube Remover
• Remove the steering column housing assembly.
Refer to Steering Column Housing - Disassemble.
• Remove the following 3 items from the steering
column jacket assembly:
1. Remove the steering shaft seal (4).
2. Remove the sensor retainer (3).
3. Remove the steering wheel speed sensor
assembly (2) from the adapter and bearing
assembly (1 ).
• Remove the following 4 items from the steering
column jacket assembly:
1. Remove the lower spring retainer (1 ).
2. Dispose of the lower spring retainer (1 ).
3. Remove the lower bearing spring (2).
4. Remove the lower bearing seat (3).
Steering Wheel and Column - Tilt 2-101
1 - - - -
2
343830
388560
343874