HVAC
Installation Procedure
1. Connect the vacuum harness jumper to the main
harness connector.
2. Connect the vacuum harness connector to the
vacuum selector valve.
3. Close the 1/P compartment.
4. Install the HV AC control. Refer to Control
Assembly Replacement.
Vacuum Hose Harness Replacement
(Main
Harness)
Removal Procedure
1. Remove the
1/P
carrier. Refer to IP Carrier
Replacement.
2. Disconnect the vacuum hoses from the actuators.
3. Remove the vacuum harness.
HVAC System - Manual
1-119
282926
282918
282925