GMC chervolet camaro 1999 Service Manual page 174

HVAC
9. Remove the A/C compressor and condenser hose
nut at the condenser.
10.
Discard the 0-ring.
11. Lower the vehicle.
12. Remove the A/C compressor and condenser hose
from the vehicle.
Installation Procedure
Lightly coat the 0-rings with a mineral base
525 viscosity refrigerant oil.
1. Install the A/C compressor and condenser hose. to
the vehicle.
2. Raise and suitably support the vehicle. Refer to
Lifting and Jacking the Vehicle in General
Information.
3. Install a new 0-ring.
Notice: Refer to Fastener Notice in Cautions and
Notices.
4. Install the A/C compressor and condenser hose
nut at the condenser.
Tighten
Tighten the A/C compressor and condenser hose
nut at the condenser to 16 N·m (12 lb ft).
5. Install a new 0-ring.
6. Install the A/C compressor and condenser
hose bolt.
Tighten
Tighten the A/C compressor and condenser hose
bolt to 50 N·m (37 lb ft).
7. Lower the vehicle.
HVAC System - Manual 1-83
365450
365450
365423