GMC chervolet camaro 1999 Service Manual page 200

HVAC
Installation Procedure
1. Install the temperature control cable to the control.
Notice: Refer to Fastener Notice in Cautions and
Notices.
2. Install the HV AC control bolts.
Tighten
Tighten the HVAC control bolts to
2.2 N·m (19 lb in).
3. Connect the temperature control cable to the A/C
module.
4. Use the following steps in order to install the
temperature control cable to the control:
4.1. Slip the temperature control cable into
position over the lever arm.
4.2. Align the shaft with the temperature control
cable shaft.
4.3. Press the temperature control cable clips
into the slot in the control.
4.4. Ensure that the temperature control cable
clips are in place.
5. Install the temperature control cable bolt.
Tighten
Tighten the temperature control cable bolt to
1.9 N·m (17 lb in).
6. Install the accessory trim plate. Refer to Bezel
Replacement - IP Cluster (Chevrolet) or Bezel
Replacement - IP C/ust~r (Pontiac) in Instrument
Panel, Gauges and Console.
HVAC System - Manual 1-109
282920
282922