Lock Housing Assembly - Assemble - GMC chervolet camaro 1999 Service Manual

2-100 Steering Wheel and Column - Tilt
343861
1
343866
2
3
343832
Steering
Lock Housing Assembly - Assemble
Assembly Procedure (
1. Install the switch actuator pivot pin (2) to the pivot
and pulse dimmer switch assembly
(1).
2.
Install the wire protector shield.
3.
Align the lock housing cover and sleeve
assembly (1) onto the steering column.
4. Lubricate the dimmer switch rod actuator (3) with
lithium grease.
5. Install the dimmer switch rod actuator (3) to the
column housing cover end base plate (2).
6.
Install the column housing cover end base
plate (2) to the lock housing cover and sleeve
assembly (1 ).
Important: The bottom edge of the dimmer switch
rod actuator must rest on the bend in the dimmer
switch rod.
Notice: Refer to Fastener Notice Fastener Notice in
Cautions and Notices.
7. Install the 3 pan head 6-lobed socket screws (1).
Tighten
Tighten the
3
pan head 6-lobed socket screws
to 9 N-m (80 lb in).
(