Turn Signal And Multifcn Switch Assembly - Assemble - Off Vehicle - GMC chervolet camaro 1999 Service Manual

.Steering
Turn Signal and Multifcn Switch
Assembly - Assemble - Off Vehicle
Assembly Procedure
1. Thread the turn signal switch assembly connector
through the lock housing cover and sleeve
assembly, if the connector is hanging.
Notice: Refer to Fastener Notice Fastener Notice in
Cautions and Notices.
2.
Install the turn signal switch assembly and secure
using 3 pan head 6 lobed socket screws (1 }.
Tighten
Tighten the 3 pan head 6 lobed socket screws
to
3.5
N-m
(31
lb in}.
3. Lubricate the signal switch arm assembly (3) with
lithium grease.
4. Install the signal switch arm assembly (3) onto the
turn signal switch assembly.
~- Secure the signal switch arm assembly (3) using
the round wash~r '1~ad screw (2).
Tighten
Tighten the round washer head screw
to 2.5 N,m (22 lb in}.
6. Install the terminal connector to the turn signal
switch assembly connector.
7. Install the terminal connector to the dimmer
switch assembly.
Steering Wheel and Column - Tilt 2-81
343961
354114
343824