1 ·90 HVAC System .. Manual
282951
282947
208554
HVAC
Installation Procedure
Coat the seal. with a mineral base 525 viscosity
refrigerant oil.
(
1.
Install a new seal to the A/C refrigerant pressure
sensor fitting.
Notice: Refer to Fastener Notice in Cautions and
Notices.
2.
Install the A/C refrigerant pressure sensor.
Tighten
Tighten the A/C refrigerant pressure sensor to
6 N·m (53 lb in}.
3. Connect the electrical connector to the A/C
refrigerant pressure sensor.
Condenser Replacement
Removal Procedure
1. Recover the refrigerant. Refer to Refrigerant
Recovery and Recharging.
2. Disconnect the intake air temperature (IAT}
sensor connector at the air intake duct, if equipped
with the 3.8L engine.
(
(